Motorola Starline SG 2000 - Current Requirements

Specifications A-7
SG 2000 Installation and Operation Manual
Table A-13 lists the current requirements for various options and the two platforms available in the
SG 2000:
Table A-13
Current requirements
Option Watts ac
power
Amps
@90V
Amps
@60V
Amps
@52V
Amps
@44V
Basic- platform (one-way,
single receiver: Note 1)
Silicon
Module D, F
Module C, E, G
Module B
82.48
69.36
56.24
1.22
1.03
0.83
1.83
1.54
1.25
2.11
1.78
1.44
2.50
2.10
1.70
Gallium Arsenide (GaAs)
Module D, F
Module C, E, G
Module B
92.72
77.04
61.36
1.37
1.14
0.91
2.06
1.71
1.36
2.38
1.98
1.57
2.81
2.33
1.86
Add for:
Additional receiver-split
band
8.96 0.13 0.20 0.23 0.27
Additional receiver,
redundant
0.64 0.01 0.01 0.02 0.02
Analog return
transmitters
9.84 0.15 0.22 0.25 0.30
Digital return
transmitters
DS-SG2-DRT/A
DS-SG2-DRT-2X/A
4.17
8.33
0.08
0.17
0.12
0.23
0.12
0.25
0.14
0.27
Reduction for split return
(3.52) (0.05) (0.08) (0.09) (0.11)
Each ingress switch
1.96 0.03 0.04 0.05 0.06
ADU
2.24 0.03 0.05 0.06 0.07
MCB
1.81 0.03 0.04 0.05 0.05
Status monitor
3.41 0.05 0.08 0.09 0.10
Note 1: Module letters denote the following:
Module B - two bridger level outputs
Module C - Three bridger level outputs
Module D - Four bridger level outputs
Module E - One trunk level, two bridger level outputs
Module F - Two trunk level, two bridger level outputs
Module G - Two trunk level, one bridger level output