Motorola VX-P949 - Saving a Waypoint; Viewing a Saved Waypoint

5 or to the preferred location format and press the Menu Select button directly below
Sel.
The front display shows the location with the selected format.
NOTICE: If the SLD99 format is selected and the range is invalid, the display shows ––––––
–––––- on the location. This situation occurs if you are using the radio outside of Sri Lanka and
using the SLD99 format. To correct this situation, switch the location display format to other
GPS options such as DDM, DMS, UTM/UCS, or MGRS.
6.14.7
Saving a Waypoint
Prerequisites: Ensure that your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
2 Perform one of the following actions:
• or to Save as Waypt and press the Menu Select button directly below Sel.
•
or to Save as Home and press the Menu Select button directly below Sel and
proceed to step 5.
• or to Save as Dest. and press the Menu Select button directly below Sel and
proceed to step 5.
A blinking cursor appears on the screen.
3 Use the keypad to edit the auto-generated waypoint, if required, or press the Back button to
return to the Location main screen.
4 Press the Menu Select button directly below Ok once you are done.
One of the following scenarios occur:
• The display shows Current loc saved as <Waypoint name>.
• The display shows Current loc saved as [Home].
• The display shows Current loc saved as [Destination].
5 To return to the Home screen, press
, the PTT button, the preprogrammed GPS button or
the Back button.
6.14.8
Viewing a Saved Waypoint
Prerequisites: Ensure your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Optn.
2
or to Waypoints and press the Menu Select button directly below Sel.
The display shows a list of waypoints.
3 Perform one of the following actions:
• or to scroll through the list.
• or to select a waypoint to view the location information in full.
MN003602A01-AF
Advanced Features
78