Motorola VX-P949 - Control Assignments and Front Panel Programming

6.16.19.3
Viewing the Control Assignments
When and where to use: This feature displays the programmable radio functions assigned to the
controls of your radio for the currently selected channel.
See Programmable Features on page 21 for more information on the various programmable features
of your radio.
Procedure:
1 Perform one of the following actions:
• Press the preprogrammed Info button.
•
or to Info and press the Menu Select button directly below Info.
2 or to Control map and press the Menu Select button directly below Sel.
The display shows the Control Map screen.
3 Perform one of the following actions:
• or to scroll through the various information.
• Press the Menu Select button directly below Back to return to the previous screen.
• Press to return to the Home screen.
6.16.20
Front Panel Programming
You are able to customize certain feature parameters in Front Panel Programming (FPP) to enhance
the use of your radio.
6.16.20.1
Entering the Front Panel Programming Mode
You can follow this procedure to enter the front panel programming (FPP) mode on your radio.
6.16.20.1.1
Federal
Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen.
2 Perform one of the following actions and proceed to the next step:
• Press the Menu Select button directly below Ok.
• Enter the password and press the Menu Select button directly below Ok.
If the password is not entered, the radio displays the non-password protected zones only.
3 Press
or to select Zn/Ch.
4 Press
or to select the required zone.
5 Press or to select the required channel.
The display shows the radio parameter screen.
MN003602A01-AF
Advanced Features
93