27
basics
To use the speakerphone with your phone’s flip
closed
:
1
Open the flip, then press and hold the
smart/speakerphone key to turn on the
speakerphone.
2
Enter then number you want to call and
press
N
.
3
When the call connects, close the flip and
continue your conversation.
4
To end the call, press and hold the
smart/speakerphone key. You will see
Call Ended
and
hear a soft audio alert.
codes & passwords
Your phone’s four-digit
unlock code
is originally set to
1234
or to the last four digits of your phone number.
The six-digit
security code
is originally set to
183729
.
Your service provider may reset these codes before
you get your phone. If your service provider didn’t
change these codes, you should change them to
prevent others from accessing your personal
information. The unlock code must contain four digits.
The security code must contain six digits.
To change a code or password
:
Find it:
s
>
w Settings
>
Security
>
New Passwords
Select the type of code you want to change, enter the
old code when prompted, then enter the new code.
If you forget your unlock code:
At the
Enter Unlock Code
prompt, try entering 1234 or the last four digits of your
phone number.
If you forget your security code
, contact your
service provider.
To Next Page
Loading...
