47
connections
4
Select the device name, or select
[Look For Devices]
to
search for a device.
If your phone could not copy the file to the other
device
, make sure the device is
on
and
ready
in
discoverable mode (see the user’s guide for the
device). Also, make sure the device is not busy with
another similar Bluetooth connection.
receive file from other device
Note:
If you do not see the Bluetooth indicator
O
at the top of the display,
turn on your phone’s
Bluetooth power
(see page 44).
1
Place your phone near the device, and send the
file from the device. (If necessary, refer to the
user’s manual for the device for instructions.)
If your phone and the sending device don’t
recognize each other,
place your phone in
discovery mode
so the sending device can
locate it (see page 45).
2
When prompted to accept the sent object, scroll
to
Yes
or
Grant
and press the center key
s
.
Your phone notifies you when the transfer is
complete. If necessary, press
Save
to save the file.
disconnect from device
Scroll to
Bluetooth
and select
Off
.
set Bluetooth options
Find it:
s
>
w Settings
>
Connection
>
Bluetooth Link
>
Setup
TTY operation
You can use an optional TTY device with your
phone to send and receive calls. You must plug the
TTY device into the phone’s headset jack and set the
phone to operate in one of three TTY modes.
To Next Page
Loading...
