48
connections
When your phone is in TTY mode, during an active call
your phone displays the international TTY mode, the
international TTY symbol, and the mode setting.
notes on TTY operation
•
Use a TSB-121 compliant cable (provided by
the TTY device manufacturer) to connect the
TTY device to the phone.
•
Set the phone volume to level 4 (middle
setting) for proper operation. If you experience
a high number of incorrect characters, adjust
the volume as needed to minimize errors.
•
For optimal performance, your phone should
be at least 12 inches (30 centimeters) from the
TTY device. Placing the phone too close to the
device may cause high error rates.
TTY setup
Find it:
s
>
w Settings
>
InitialSetup
1
Scroll to
TTY Setup
and press
Change
.
2
Scroll to a
TTY Setup
option and press
Select
.
ù
When you set your phone to a TTY mode, it
operates in that mode whenever the TTY device is
connected.
option
Voice
Set/return to standard voice mode.
TTY
Transmit and receive TTY characters.
VCO
Note:
This option may not be
available on this phone.
Receive TTY characters but transmit
by speaking into phone microphone.
HCO
Note:
This option may not be
available on this phone.
Transmit TTY characters but receive
by listening to phone earpiece.
To Next Page
Loading...
