Radio Calls
This chapter explains the operations to receive, respond to,
make, and stop calls. Calls supported are Group, Private,
and Broadcast calls.
Group Calls
Your radio must be configured as part of a group to receive
a call from or make a call to the group of users.
Making Group Calls
1 Select a channel with the active talkgroup.
2 Press and hold the PTT button to make the call.
The green LED lights up. The display shows the
talkgroup alias.
3 Wait for the Talk Permit Tone to end and speak
clearly into the microphone.
4 Release the PTT button to listen.
The green LED blinks when the target radio
responds. The display shows the talkgroup alias.
NOTICE:
The call ends when there is no voice activity
for a predetermined period. The radio returns
to the screen you were on before initiating the
call.
Responding to Group Calls
When you receive a Group Call:
• The green LED blinks.
• Your radio generates a momentary incoming call alert
tone before unmuting to the caller's audio.
1 To respond to the call, press PTT button.
The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone.
English
26
To Next Page
Loading...
