EasyManua.ls Logo

Motorola WAVE TLK 100 - Searching for Bluetooth Devices; Connecting to Bluetooth Devices; Disconnecting from Bluetooth Devices; Clearing Bluetooth Pairing

Motorola WAVE TLK 100
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The display shows an "X" mark beside the Bluetooth
icon.
Searching for Bluetooth Devices
To search for other Bluetooth devices, press the
Power/Info button until you see the Bluetooth icon.
The radio displays Bluetooth Searching icon and
Voice Announcement sounds Bluetooth Searching.
Connecting to Bluetooth Devices
1 While searching, the radio search for the last
connected Bluetooth accessory.
Once connected, an indication tone sounds from the
connected Bluetooth accessory.
2 To view Bluetooth's status information, press the
Power/Info button.
The radio displays Bluetooth Connected icon and
Voice Announcement sounds Bluetooth Connected.
Disconnecting from Bluetooth Devices
1 When the Bluetooth accessory goes out of range or
turn off, it will be disconnected from the radio
automatically.
The radio sounds an indication tone after
disconnected from the Bluetooth accessory.
2 The radio attempts to reconnect to the same
Bluetooth accessory within a reconnect timer.
Clearing Bluetooth Pairing
1 Press the Power/Info button until you see the
Bluetooth icon.
2 Scroll through the bluetooth list using Talkgroup/
Contact List Scroll Rocker or Volume Up and
Volume Down buttons until the right bluetooth is
displayed.
English
40

Table of Contents

Other manuals for Motorola WAVE TLK 100

Related product manuals