Using the Wearable Terminal 2 - 17
Figure 2-14
Special Character Keyboard - Character Layer
Navigate the keypad in the same manner as described above. To return to the alphanumeric layer, press the
CH key on the keypad.
Pressing CAP or SH switches the keypad to the upper case alphanumeric keypad.
Figure 2-15
Special Character Keyboard in upper case Alphanumeric Mode
Press the key to close the Special Character keypad.
Resetting the Wearable Terminal
There are two types of resets, warm boot and cold boot. A warm boot restarts the wearable terminal by closing
all running programs.
A cold boot also restarts the wearable terminal, but erases all stored records and entries in RAM. Data saved in
flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the
factory default settings.
Perform a warm boot first. This restarts the wearable terminal and saves all stored records and entries. If the
wearable terminal still does not respond, perform a cold boot.
Performing a Warm Boot
Hold down the Power button for approximately five seconds. As soon as the wearable terminal starts to
perform a warm boot release the Power button.
To Next Page
Loading...
