Display Status Symbols Menu Entries (Use With Menu Navigation)
*Available at a future date.
Call Received. Receiving an individual
call
View/Program Mode. The radio is in the
view or program mode; On Steady = view
mode; Flashing = program mode
s
Received Signal Strength Indication
(RSSI).
Received signal strength for the
current site (trunking only). The more
stripes in the symbol, the stronger the
signal.
b
Battery
• Conventional = Flashes when the
battery is low.
• Smart = The number of bars (0-3)
shown indicates the charge remaining
in your battery.
Note: Smart battery will be available at a
future date.
r
Talkaround. You are talking directly to
another radio or through a repeater;
On = direct;
Off = repeater
C
Monitor (Carrier Squelch). This channel
is being monitored.
T
Scan. The radio is scanning a scan list
m
p
p
Entry Menu Selection Page
BATT *Smart Battery 17
CALL Private Call 58
CHAN Select a Channel 25
CLCK Edit Time and Date 68
DIR Repeater/Direct 64
MUTE Keypad Mute 35
NAME Text Select 47
NUM Number Select 45
PAGE Call Alert Page 60
Entry Menu Selection Page
PHON Phone 53
PROG Editing 45
PSWD Password 34
PWR TX Power Level 31
RPGM Reprogram Request 76
SCAN Scan On/Off 49
SITE Site Lock 80
TGRP Talkgroup Call 63
VIEW Viewing a List 43
ZONE Select a Zone 24
Menu Navigation
U to find Menu Entry
D, or E, or F directly below
Menu Entry to select
h to exit
V or U to scroll through sub-list
D, or E, or F directly below
Menu Entry to select
To Next Page
Loading...
Need help?
General
