Motorola XTS3000 User Manual

 &%
,QWURGXFWLRQ
Belt Clip
Note: The battery must be removed from the radio before the belt
clip can be installed or removed.
$WWDFKWKH%HOW&OLS
5HPRYHWKH%HOW&OLS
1 Holding the battery in one
hand so that the top of the
battery faces upward and the
back of the battery faces you,
hold the belt clip in the other
hand with its top facing
upward.
2 Align the slide assembly on the
front of the belt clip with the
slots on the back of the battery.
Slide the belt clip downward
toward the bottom of the
battery until the belt clip clicks
in place.
1 Hold the battery in one hand
so that the top of the battery
faces upward, and the front
(radio side) of the battery faces
you.
2 At the top of the battery, press
down on the belt clip’s metal
tab and slide the belt clip
upward. Continue to slide the
belt clip upward until it is free
from the battery.
Slide
Assembly
Slots
Belt Clip
Battery
Metal
Tab
&%B$;B8*B%RRNERRN3DJH7XHVGD\-XQH30

Motorola XTS3000 Specifications

General

Channels	Up to 255
Display	Alphanumeric LCD
Zones	Up to 16
Battery Type	NiCd, NiMH, Li-Ion
IP Rating	IP54
Frequency Range	136-174 MHz
Weight	14.5 oz
Battery Life	Up to 10 hours (depending on battery type and usage)
Encryption	DES, AES
Signaling	MDC1200, DTMF, Quick Call II
Operating Temperature	-30°C to +60°C (-22°F to +140°F)