Programming Mode
18
k
k
Programming Mode
The following table lists the functions you can set by pressing and holding a button
while you are turning on your radio.
In order to talk with someone on your two-way radios, the following features need to
be set exactly alike:
1. Channel
: Current channel that the radio is using, depending upon radio model.
2. Frequency
: The frequency your radio uses to transmit/receive.
3. Interference Eliminator Code
: These codes help minimize interference by
providing you with a choice of code combinations.
Please refer to page 25.
Key(s) Pressed. Function
M
J P
Access k Programming Mode:
Three second delay.
M
\
P +
)
+
Reset factory settings: Three second delay.
Will not work if Manager Lock is enabled.
M
P
Enable VOX without accessories
(XU2600 and XV2600 Only).
]
P
Tu r ns “End-of-Transmission Tone On/Off.
Radio default setting is “Off.”
[
P
Turns Keypad Tones On/Off.
Radio default setting is “On.”
6881038B80.book Page 18 Wednesday, September 26, 2001 4:16 PM
To Next Page
Loading...
