EN - 14
•
careful to retain the original cutting angle.
•
8.4 TUNING MINIMUM SPEED
If the cutting means moves when the
engine is running idle, contact your dealer
to have the engine adjusted correctly.
8.5 CARBURETTOR
9. STORING THE MACHINE
IMPORTANT The safety regulations to
follow for putting into storage are described
in paragraph 2.4. Strictly comply with these
instructions to avoid serious risks or hazards.
1.
2. Start the engine and run it idle until it
the fuel that is left in the carburettor.
3. Wait for the engine to cool.
4.
5.
6.
authorised assistance centre.
7.
–
–
–
–
–
10. HANDLING AND TRANSPORT
–
–
–
–
–
handgrips and position the cutting
that used during operations.
• When using a vehicle to
– position it so that it can cause
–
11. ASSISTANCE AND REPAIRS
and responsibilities of the Manufacturer.
•
•
spare parts and accessories have been
• Non-genuine spare parts and accessories
are not approved. Using non-genuine spare
•
To Next Page
Loading...