EN - 1
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
NOTE or IMPORTANT these give details
or further information on what has already been
said, and aim to prevent damage to the machine.
The
1.2 REFERENCES
1.2.1 Figures
1.2.2 Headings
References to headings or paragraphs are
WARNING!: READ THOROUGHLY THE INSTRUCTION BOOKLET
EN
INDEX
1. GENERAL INFORMATION ..................................... 1
2. SAFETY REGULATIONS ........................................ 2
3. GETTING TO KNOW THE MACHINE ..................... 4
.. 4
.................................................... 5
............................ 5
........................................... 5
4. ASSEMBLY ............................................................. 6
................................... 6
........................................... 6
guards ............................................................ 6
. 8
5. CONTROLS ............................................................ 8
................................. 8
5.2 Throttle control lever ....................................... 8
........................................ 8
.................... 8
.................................. 8
....................................... 8
...................................... 8
6. USING THE MACHINE ........................................... 8
6.1 Preparation ..................................................... 8
................................................. 9
6.3 Startup ........................................................... 9
6.4 Operation ..................................................... 10
6.5 Advice on operation ..................................... 11
6.6 Stop.............................................................. 11
6.7 After operation .............................................. 11
7. ROUTINE MAINTENANCE ................................... 11
7.1 General ........................................................ 11
............................ 12
7.3 Refuelling ..................................................... 12
.......... 12
..................................... 13
................................................... 13
....................................... 13
7.8 Nuts and bolts .............................................. 13
.................... 13
......................... 13
8.2 Replacing the cutting line head .................... 13
.................. 13
................................ 14
8.5 Carburettor ................................................... 14
9. STORING THE MACHINE .................................... 14
10. HANDLING AND TRANSPORT ............................ 14
11. ASSISTANCE AND REPAIRS ............................... 14
12. WARRANTY COVERAGE ..................................... 15
13. MAINTENANCE TABLE ........................................ 15
14. PROBLEM IDENTIFICATION ............................... 15
To Next Page
Loading...
Need help?
General