EN - 145
◆ Headlights / backlighting
Hold the (>2S) button to activate the headlight and taillights. Hold the (>2S) button again to
turn off the headlight. The brightness of the backlight can be set in the display settings
"Brightness". If the display /Pedelec is switched on in a dark environment, the display
backlight/headlight will automatically be switched on. If the display backlight/headlight has been
manually switched off, the automatic sensor function is deactivated. You can only turn on the light
manually. After switching on the system again.
If the front or rear light is not connected, the button can only be used to switch the display backlight on
/ off.
◆ Walk Assistance
Activation: Press the button until this symbol appears. Next hold down the button whilst
the symbol is displayed. Now the Walk assistance will activate. The symbol will flashes and
the pedelec moves approx. 6 km/h. After releasing the button, the motor stops automatically and
switches back to level 0.
The walking assistant function can only be used when pushing the bike.
Attention! There is a risk of injury if the rear wheel does not come into contact with the ground when
using the Walk Assist.
To Next Page
Loading...