EN - 1
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual contain important informa-
tion regarding safety and operation and are emphasised in
this manner:
NOTE OR IMPORTANT these give details or further
information on what has already been indicated, and aim to
prevent damage to the machine.
This symbol indicates danger. Failure to observe the
warning can lead to possible personal and/or third party injury
and/or damage.
The paragraphs highlighted with a grey dotted square in-
dicate the optional characteristics that are not available
on all models documented in this manual. Check if the
characteristics are available on this model.
Whenever reference is made to a position on the machine
-
ator's working position.
1.2 REFERENCES
1.2.1 Figures
1.2.2 Titles
The manual is divided into chapters and paragraphs. The
regulations".
References to titles or paragraphs are marked with the abbre-
viation chap. or par. and the relevant number. Example: “chap.
2. SAFETY REGULATIONS
2.1 TRAINING
Become acquainted with the controls and the
proper use of the machine. Learn how to stop the motor
quickly. Failure to follow the warnings and instructions
may result in re and/or serious injury.
• Never allow children or persons unfamiliar with these
instructions to use the machine. Local laws may establish
a minimum age for users.
•
or mental capabilities or lack of experience and knowl-
edge if they have been given supervision or instructions
concerning use of the appliance in a safe way and under-
stand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
WARNING!: READ THIS MANUAL CAREFULLY BEFORE USING THE
MACHINE. Keep safe for future use.
EN
INDEX
1. GENERAL INFORMATION .......................................... 1
1.1 How to read the manual ...................................... 1
.......................................................... 1
............................................. 1
................................................................ 1
.......................................
.................................................
.........................................
.....................................
.................................... 3
3. GETTING TO KNOW THE MACHINE .......................... 3
3.1 Description of the machine and planned use ..... 3
......................................................... 3
...............................................
................................................
...................................................................
................................................
................................................ 5
............................. 5
5. CONTROLS .................................................................. 5
5.1 Safety key (Deactivation device) ........................ 5
................................................................. 5
5.3 Cutting height adjustment ................................... 5
................................................. 5
....................................... 5
......................................................
...............................................................
............................................................
.........................................
.....................................................
............................................................
............................................
............................................................
..........................................................
.....................................................
...........................................
...................................
.....................................................
.....................................................................
............................................
...............................................
10. HANDLING AND TRANSPORTATION ........................
11. MAINTENANCE TABLE ......................................
....................................... 10
................ 10
......11
................................
13.1 "Mulching" kit.....................................................
............................................................
13.3 Battery charger .................................................
To Next Page
Loading...
