13
175mm/6.89in 330mm/12.99in
Overall seat width - 350mm/13.78in.
340mm/13.39in
510mm/20.08in175mm/6.89in
580mm/22.83in
13. Technical data
The bath lift seat and base is made of glass-lled polypropylene. The base frame tubes are made
of aluminium. The hand control and battery are made of ABS. The hand control button cover
and suction feet are made of thermoplastic elastomer.
The bath lift is in the ocial category of “internally powered equipment” and is not suitable for
use in the presence of ammable anaesthetic mixture with air or nitrous oxide.
The equipment is tested in accordance with:
• BS EN 10535: 2006
• BS EN 60601-1: 2006
• The European Council Directive 93/42/EEC relating to Medical Devices
The bath lift complies with the WEEE directive.
DISPOSAL: The plastic, metal parts, packaging materials and suction feet are recyclable but the
Nickel Metal Hydride (NiMH) battery, should be disposed of only by returning it to your supplier,
the manufacturer or an authorised disposal point.
Symbol Explanation
Maximum load - lifting capacity (person).
Caution! Surface hot to touch.
To Next Page
Loading...