EasyManua.ls Logo

Movincool CLIMATE PRO 12 - Installation; Site Selection and Unit Movement

Movincool CLIMATE PRO 12
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
INSTALLATION
Choosing an Installation Site
CAUTION: Following are some precautions to consider before
choosing your installation site. Please review carefully as improper
installation may result in personal injury or damage to the unit.
Do not use the unit in areas where leakage of flammable gas may occur.
Do not use the unit in areas where it is exposed to rain or water.
Do not use the unit in an environment which contains excessive amounts of
corrosive gas or vapor.
Do not use in areas where the temperature is outside the allowable operating
range.
Do not install the unit in sloping areas. The unit may move or topple over even
if the casters are set to the LOCKED position.
Install the unit in areas where can withstand the weight of the unit.
*1: Approximate weight when the drain tank is full of water.
Allow 24 inch (610 mm) of unobstructed airflow for both the air inlets and
outlets.
Model
Unit Weight
*1
Climate Pro 12 249 lb (113 kg)

Related product manuals