What to do if my Movincool Air Conditioner does not operate?
If your Movincool Air Conditioner isn't turning on, check if the ground fault breaker has tripped and reset it if needed. Also, check if the drain tank is full (the FULL TANK LED will be flashing) and empty it.
Why is my Movincool Air Conditioner not cooling properly?
If your Movincool Air Conditioner isn't cooling effectively, start by checking the air filters to ensure they are clean. Next, verify that neither the air inlet nor the outlet is obstructed. Lastly, make sure the temperature is set to your desired level.
What to do if Movincool OFFICE PRO 12 displays 'OPEN RT' or 'SHRT RT'?
If the Movincool Air Conditioner displays “OPEN RT” or “SHRT RT”, the cool mode operation will be off. To resume normal operation, the room thermistor must be fixed.
What does it mean when Movincool OFFICE PRO 12 displays 'OPEN FT' or 'SHRT FT'?
When the display shows “OPEN FT” or “SHRT FT”, the cool mode operation will be off. Normal display and cool mode operation will resume after the freeze thermistor is fixed.
What to do if Movincool Air Conditioner drain tank is full?
If the LCD displays “TANK FL” and the FULL TANK LED flashes, it means the drain tank is full. Emptying the drain tank and pushing the “ON/OFF” button will return the unit to normal operation.
General| Power Supply | 115V/60Hz |
|---|---|
| Refrigerant | R-410A |
| Running Amps | 10.5 A |
| Voltage | 115V |
| Frequency | 60 Hz |
| Cooling Capacity | 12, 000 BTU/h |
| Power Consumption | 1.2 kW |
| Noise Level | 52 dBA |
| Operating Temperature Range | 64°F to 95°F |
To Next Page
