Do you have a question about the Moxa Technologies EDS-508A Series and is the answer not in the manual?
Series | EDS-508A |
---|---|
Switching Capacity | 1.6 Gbps |
MAC Address Table Size | 8K |
Type | Managed Industrial Ethernet Switch |
Ports | 8x 10/100BaseT(X) ports |
Power Input | 12 to 48 VDC |
Operating Temperature | -40 to 75 °C |
Mounting | DIN-Rail, Wall mounting |
Redundancy | RSTP |
Management | SNMP |
Standards | IEEE 802.3, 802.3u, 802.3x, 802.1D, 802.1Q |
Enclosure | IP30 |
Discusses the adoption of Ethernet in industrial applications and the differences between industrial and commercial equipment.
Introduces the Moxa EtherDevice Switch, highlighting its features for harsh industrial environments.
Lists the items included in the Moxa EtherDevice Switch package.
Details the advanced features and technologies supported by the Moxa EtherDevice Switch.
Step-by-step guide for configuring the EDS switch via the RS-232 serial console connection.
Instructions for accessing and configuring the EDS switch using a Telnet console over a network.
Guide to accessing and configuring the EDS switch through its web browser interface.
Procedure for disabling Telnet and Web Browser access for enhanced security.
Covers essential settings like system identification, password, IP, port, network, and time parameters.
Details methods for updating system files via TFTP, local import/export, and backup media.
Explains the concept and configuration of Port Trunking for increased bandwidth and redundancy.
Covers SNMP versions, security settings, read/write access, and trap configurations.
Details redundancy options including Turbo Ring, Turbo Ring V2, Turbo Chain, and STP/RSTP.
Explains how to prioritize network traffic using QoS for improved performance and reduced latency.
Covers VLAN concepts, benefits, switch support, and detailed VLAN management procedures.
Explains multicast filtering, its benefits, and configurations for IGMP snooping and GMRP.
Provides options for managing and limiting network bandwidth to prevent issues like broadcast storms.
Details security features like Static Port Lock and IEEE 802.1X authentication for network access.
Guides on setting up email and relay warnings for system and port events.
Explains the fast recovery mechanism for network link changes.
Describes using DHCP/BOOTP/RARP for automatic IP address assignment to connected devices.
Covers Mirror Port for traffic monitoring and Ping utility for network troubleshooting.
Introduces the Link Layer Discovery Protocol for network topology and device information.
Details how to monitor switch and port statistics, including packet rates and traffic types.
Explains how to view and filter the MAC address table for network analysis.
Describes the event log table for recording system events and operational history.
Guides on configuring syslog servers for centralized event log management.
Instructions for enabling secure encrypted access to the switch's web interface via HTTPS/SSL.
Instructions on how to locate and launch the EDS Configurator software.
Utility to locate all EDS switches on the LAN using MAC address-based search.
Method to search for specific EDS switches by entering their IP addresses.
Procedure for downloading and applying the latest firmware to EDS switches.
Steps to reconfigure network settings like IP address, subnet mask, and gateway.
Utility to save the current configuration of an EDS switch to a text file.
Process to load a saved configuration file onto an EDS switch.
Procedure to unlock a switch that is protected by password for configuration changes.
Details the System Group MIB objects for network device information.
Details the Interfaces Group MIB objects for network interface statistics.
Details the IP Group MIB objects related to IP addressing and routing.
Details the ICMP Group MIB objects for Internet Control Message Protocol statistics.
Details the TCP Group MIB objects for Transmission Control Protocol statistics.
Details the UDP Group MIB objects for User Datagram Protocol statistics.
Details the Transmission Group MIB objects for network transmission statistics.
Details the SNMP Group MIB objects for SNMP agent information.
Details the dot1dBridge Group MIB objects for bridge-related information.
Provides a map of Modbus/TCP registers for the EDS-505A, including system and port information.
Provides a map of Modbus/TCP registers for the EDS-508A, including system and port information.