Need help?Do you have a question about the Moxa Technologies EtherDevice EDS-405A-PTP Series and is the answer not in the manual?
General| Series | EDS-405A-PTP |
|---|---|
| Category | Industrial Ethernet Switch |
| Ports | 5 |
| Switching Capacity | 1 Gbps |
| Switching Latency | < 10 μs |
| MAC Address Table Size | 8K |
| Ethernet Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Power Input | 12 to 48 VDC |
| Operating Temperature | -40 to 75 °C |
| Housing | IP30 |
| Protocols | SNMP, DHCP, HTTP, HTTPS, RMON, SMTP, LLDP |
| Jumbo Frame Support | Yes (up to 9, 216 bytes) |
Instructions for attaching the DIN-rail mounting plate to the switch.
Instructions for optionally mounting the switch on a wall.
General guidelines for routing power and device wiring to avoid interference.
Explains the importance of grounding for limiting noise and interference.
Details how to connect wires to the relay contact terminal block.
To Next Page