To Next PageTo Next Page
Need help?Do you have a question about the Moxa Technologies EtherDevice EDS-408A and is the answer not in the manual?
General| Model/Series | EDS-408A |
|---|---|
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Switching Capacity | 1.6 Gbps |
| MAC Address Table Size | 8K |
| Mounting | DIN-rail mounting |
| Ports | 8 |
| Power Input | 12 to 48 VDC |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Enclosure | IP30 |
| Certifications | CE, FCC, UL |
Step-by-step guide for configuring the switch via RS-232 serial connection.
Instructions for accessing and configuring the switch using Telnet over a network.
Guide to configuring the switch through its web-based graphical interface.
Covers essential network and system identification settings for the switch.
Explains network redundancy protocols like Turbo Ring and STP/RSTP for reliability.
Instructions for updating the switch firmware using the configurator.
Steps to reconfigure the switch's IP address and network settings.
How to save the switch's configuration to a file.
How to load a saved configuration file onto the switch.
