Need help?Do you have a question about the Moxa Technologies EtherDevice EDS-510A Series and is the answer not in the manual?
General| Series | EDS-510A |
|---|---|
| Product Type | Managed Ethernet Switch |
| MAC Address Table | 8K |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Humidity | 5 to 95% (non-condensing) |
| Ethernet Ports | 8 x 10/100BaseT(X) |
| Jumbo Frame Support | Yes, up to 9 KB |
| Flow Control | IEEE 802.3x |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Mounting | DIN-rail mounting |
| Switching Technology | Store-and-forward |
| Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w |
| Management | Web-based, Telnet |
| Redundancy Protocols | Turbo Ring, RSTP |
| Certifications | Class I Division 2, ATEX, IECEx |
General introduction to the Moxa EDS-510A series switches, highlighting their purpose in industrial applications.
Lists all items included in the EDS-510A switch package, for verification upon receipt.
Highlights key capabilities and specifications of the EDS-510A switches, such as industrial networking and redundancy.
Step-by-step guide for initial setup and access via the serial console port.
Instructions for accessing and managing the switch's console utility over a network using Telnet.
Guide to accessing and configuring the switch through its user-friendly web interface.
Covers essential initial configurations like system identification, password, and network parameters.
Explains how to aggregate multiple ports for increased bandwidth and redundancy.
Details protocols like Turbo Ring and STP/RSTP for network fault tolerance and faster recovery.
Explains how to segment the network into logical groups using VLANs for improved efficiency.
Improves network performance by controlling multicast traffic flow using IGMP and GMRP.
Covers Static Port Lock and IEEE 802.1X for securing network access at the port level.
Configures email and relay alerts for critical network events and status changes.
Provides tools like Mirror Port and Ping for troubleshooting network problems.
Covers MAC address table, event logs, syslog, and HTTPS/SSL for network visibility.
How to launch and use the Moxa EDS Configurator software for managing switches.
Utility to locate EDS-510A switches on the local network by MAC address.
Procedure for updating the switch's firmware to the latest version for improved functionality.
How to change the network configuration (IP, subnet, gateway) of a switch.
Saving and restoring switch configurations to/from a text file for backup or deployment.
Lists standard MIB II groups supported by the EDS-510A for network management.
Details Modbus/TCP registers for system, port, packet, and redundancy information.
To Next Page
