EDS-510A Series User’s Manual EDS Configurator GUI
4-5
Modify IP Address
You may use the Modify IP Address function to reconfigure EDS-510A’s network settings. Start
by clicking the Modify IP address icon
, or by selecting Modify IP address under the
Configuration menu.
The Setup Configuration window will open. Checkmark the box to the left of those items that
you wish to modify, and then Disable or Enable DHCP, and enter IP Address, Subnet mask,
Gateway, and DNS IP. Click OK to accept the changes to the configuration.
Export Configuration
The Export Configuration utility is used to save the entire configuration of a particular
EDS-510A to a text file. Take the following steps to export a configuration:
1. Highlight the switch (from the Server list in the Configurator window’s left pane), and then
click the Export toolbar icon
or select Export Configuration from the Configuration
menu. Use the Open window to navigate to the folder in which you want to store the
configuration, and then type the name of the file in the File name input box. Click Open.
To Next Page
Loading...
Need help?
General
