EDS-510A Series User’s Manual Featured Functions
3-3
Web Auto-logout (s)
Setting Description Factory Default
60 ~ 86400 (seconds)
Disable or extend the auto-logout time for the
web management console.
0 (disable)
Age time (s)
Setting Description Factory Default
15 ~ 3825 (seconds)
The length of time that a MAC address entry
can remain in the Moxa switch. When an
entry reaches its aging time, it “ages out” and
is purged from the switch, effectively
cancelling frame forwarding to that specific
port.
300
Password
The EDS-510A provides two levels of access privilege: admin privilege gives read/write access to
all EDS-510A configuration parameters, and user privilege provides read access only. You will be
able to view the configuration, but will not be able to make modifications.
ATTENTION
The EDS-510A’s default Password is not set (i.e., is blank). If a Password is already set, then
you will be required to type the Password when logging into the RS-232 console, Telnet console,
or web browser interface.
Account
Setting Description Factory Default
admin “admin” privilege allows the user to modify all
EDS-510A configurations.
user “user” privilege only allows viewing EDS-510A
configurations.
admin
To Next Page
Loading...
Need help?
General
