EDS-510A Series User’s Manual Featured Functions
3-13
PTP Setting
Operation IEEE 1588/PTP
Setting Description Factory Default
Operation Disable or enable IEEE 1588(PTP) operation Disable
Configuration IEEE 1588/PTP
Setting Description Factory Default
Clock Mode Support software-based IEEE 1588(PTP) mode Disable
Sync Interval Period for sending synchronization message (in
seconds)
Disable
Sub-domain Name Support _DFLT(Default) domain only _DFLT
Status
Setting Description Factory Default
Offset To Master
(nsec)
Deviation between local time and the reference
clock (in nanoseconds).
Grandmaster UUID When the clock has a port in PTP_SLAVE state,
this member’s value is the value of the grand master
Clock's Uuid field of the last Sync message received
from the parent of the slave port.
Parent UUID When the clock has a port in PTP_SLAVE state,
this member’s value is the value of the source-Uuid
field of the last Sync message received from the
parent of the slave port.
Clock Stratum The stratum number describes one measure of the
quality of a clock. Each clock is characterized by a
stratum number used by the best master clock
algorithm as one parameter of clock quality.
4
Clock Identifier Properties of the clock. DFLT
PTP Port Settings
Setting Description Factory Default
Port Enable Enable or disable PTP port operation. None
Port Status Display PTP port real status. PTP_DISABLED
To Next Page
Loading...
Need help?
General
