EDS-510A Series User’s Manual Featured Functions
3-75
Local User Database Setup
Setting Description Factory Default
User Name
(Max. 30 characters)
User Name for Local User Database None
Password
(Max. 16 characters)
Password for Local User Database None
Description
(Max. 30 characters)
Description for Local User Database None
NOTE
The user name for the Local User Database is case-insensitive.
Port Access Control Table
The port status will indicate whether the access is authorized or unauthorized.
Using Auto Warning
Since industrial Ethernet devices are often located at the endpoints of a system, these devices will
not always know what is happening elsewhere on the network. This means that an industrial
Ethernet switch that connects to these devices must provide system maintainers with real-time
alarm messages. Even when control engineers are out of the control room for an extended period
of time, they can still be informed of the status of devices almost instantaneously when exceptions
occur. The EDS-510A supports different approaches to warn engineers automatically, such as by
using email and relay output. It also supports two digital inputs to integrate sensors into your
system to automate alarms using email and relay output.
To Next Page
Loading...
Need help?
General
