EDS-510A Series User’s Manual Featured Functions
3-91
The table will display the following information:
MAC This field shows the MAC address
Type This field shows the type of this MAC address
Port This field shows the port that this MAC address belongs to
Using Event Log
Bootup This field shows how many times the EDS-510A has been rebooted or cold started.
Date The date is updated based on how the current date is set in the “Basic Setting” page.
Time The time is updated based on how the current time is set in the “Basic Setting” page.
System
Startup
Time
The system startup time related to this event.
Events Events that have occurred.
NOTE
The following events will be recorded into the EDS-510A’s Event Log table:
1. Cold start
2. Warm start
3. Configuration change activated
4. Power 1/2 transition (Off On), Power 1/2 transition (On Off)
5. Authentication fail
6. Topology changed
7. Master setting is mismatched
8. DI 1/2 transition (Off On), DI 1/2 transition (On Off)
9. Port traffic overload
10. dot1x Auth Fail
11. Port link off / on
To Next Page
Loading...
Need help?
General
