EDS-408A/405A Series User’s Manual Featured Functions
3-8
Time
EDS has a time calibration function based on information from an NTP server or user specified
Time and Date information. Functions such as Auto warning Email can add real-time information
to the message.
NOTE
EDS does not have a real time clock. The user must update the Current Time and Current Date
to set the initial time for EDS after each reboot, especially when the network doesn’t have an
Internet connection for NTP server or there is no NTP server on the LAN.
Current Time
Setting Description Factory Default
User adjustable
time.
The time parameter allows
configuration of the local time in local
24-hour format.
None (hh:mm:ss)
Current Date
Setting Description Factory Default
User adjustable
date.
The date parameter allows
configuration of the local date in
yyyy/mm/dd format.
None (yyyy/mm/dd)
System Up Time
Indicates EDS’s up time from the last cold start. The unit is seconds.
Time Zone
Setting Description Factory Default
User selectable
time zone
The time zone setting allows
conversion from GMT (Greenwich
Mean Time) to local time.
GMT (Greenwich Mean
Time)
NOTE
Changing the time zone will automatically correct the current time. You should configure the
time zone before setting the time.
To Next Page
Loading...
Need help?
General
