NPort 5110 Series User’s Manual Getting Started
2-2
Panel Layout
NPort 5110
Top Panel View
DIN-Rail
screw hole
Wallmount
screw hole
Ready
Link
Tx/Rx
Serial Device Server
5110
10/100M
Ethernet
RESET
9-30VDC
Port 1 RS-232
Male DB9 serial port
Front Panel View
RJ45 10/100M Ethernet port
Reset button
Power input
Rear Panel View
Stick-on pad
Connecting the Hardware
This section describes how to connect NPort 5110 to serial devices for first time testing purposes.
We cover Connecting to the Network, Connecting to a Serial Device, and LED Indicators.
Connecting the Power
Connect the 9-30 VDC power cord with NPort 5110’s power input. The “Ready” LED will show a
solid red color until the system is ready, at which time the “Ready” LED will change to a green
color.
To Next Page
Loading...
