Page 2 of 24 FLOMAX 8 BZ AL (en)
GENERAL DESCRIPTION
FLOMAX 8:
2” x 2” Self Priming, Hydraulic Self Priming Pump
Flomax® 8 pumps utilize a semi-open impeller design to allow for passage of larger solid sizes. Several seal options are avail-
able in addition to the standard type 2100 carbon / Ceramic / Viton mechanical seal.
SPECIFICATIONS
Suction And Discharge .............. 2” x 2” NPT
Application
..........................
Agricultural, Commercial, Industrial, Marine, OEM
Materials of construction ............ Bronze, Aluminum
Flow
CC
................................. Up to 150 gpm (548.8 lpm)
Hydraulic
........................... Up to 200 gpm (662.4 lpm)
Head Feet
CC
................................. Up to 100 ft (30.4 m)
Hydraulic
........................... Up to 275 ft (70.1 m)
Suction lift
........................... Up to a 25 ft (7.6 m)
Impeller
.............................. 5” (127 mm) Semi-open
Motor
................................ Up to 3 HP (2.24 kw)
Hydraulic Motor
..................... 0.37 cu.in. (3.60 ml)
0.45 cu.in. (6.06 ml)
0.58 cu.in. (7.3 ml)
Hydraulic System Pressure
........... Up to 1900 psi (175.8 bar)
Hydraulic Fluid Flow
................. Up to 12 gpm (41.6 lpm)
Maximum Solid Size
................. 0.56” (14.2 mm) diameter
Drive Options
........................ Close coupled 56C, Engine mount 5.5 HP, Engine mount 6.5 HP
Close coupled 145TC
Pedestal
PumPAK® (without motor)
Seal
.................................. Standard carbon / Ceramic / Viton
Special seal material combinations available (Consult factory)
Max Solid Size
....................... 0.56”
Drive Sleeve
......................... 316 stainless steel
Options
.............................. 5 blade impeller available for higher ows, Base plate,
Double seal available for dry run applications, Flanges not included on SS models
Features
............................. Renewable wear plate, Stainless steel drive sleeve,
Stainless steel fasteners.
To Next Page
Loading...