MPI EchoBed X - Using the Vasscan Table X Foot Rest

Use Instructions
Echo/Vascular User Manual (15381-C) Page 19 of 46 DCR-00172
Using the VasScan Table™ X Foot Rest
The VasScan Table™ X is equipped with a foot rest used during procedures requiring a
reverse Trendelenburg position.
The foot rest plugs into the receiving block
located on the stationary section. The foot
rest height can be adjusted by
approximately 3” increments.
WARNING
• The footboard should be used for steep reverse Trendelenburg positions to ensure patient
stability.