Echo/Vascular User Manual (15381-C) Page 8 of 46 DCR-00172
Set Up
The product has been shipped to you in “plug and play” condition. After unpacking the
product, we recommend performing an initial test of your product to ensure that each
function is in correct working order. After reviewing this manual you are ready to begin
using your product.
After removing padding and packaging materials locate primary power
supply cord and attach to suitable grounded power outlet.
To test actuator function, locate the hand control and depress each
button one at a time. (Depressing multiple buttons simultaneously will
prevent the motor from operating.)
If any function does not operate, perform the test procedures listed in
the Troubleshooting Guide.
Transport Position
It is recommended that the patient surfaces be in a horizontal position if the product is
used to transport patients.
To Next Page
Loading...