The product may be used with a
pediatric/geriatric adaptor. To
install use the following steps:
1. Lower the Drop Section
2. Remove the non- pinch
closure flap by grasping one
side of the flap and gentle
separating the hook and
loop fastener.
3. Position the adaptor locator
flanges within the imaging
area.
4. Remove the adaptor when
not needed.
5. With the drop-section
lowered, align the top edge
of the non-pinch closure
flap, (within the access
cavity) with the top edge of
the support surface.
6. Press the hook and loop
attachment strips together.
To Next Page
Loading...