MPM MPM-45-IM-07 - Timer Functions; Minute Minder and Zone Timers

TO LOCK THE CONTROLS
Touch the keylock
control. The timer indicator will show ‘Lo’.
TO UNLOCK THE CONTROLS
 Make sure the Induction hob is turned on.
 Touch and hold the keylock control
for a while.
 You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are disable except the ON/OFF, you
can always turn the ceramic hob off with the ON/OFF control in an emergency, but you
shall unlock the hob first in the next operation.
USING THE TIMER
You can use the timer in two different ways:
 You can use it as a minute minder. In this case, the timer will not turn any cooking zone off
when the set time is up.
 You can set it to turn one cooking zone off or more than one after the set time is up.
 You can set the timer for up to 99 minutes.
USING THE TIMER AS A MINUTE MINDER
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re not selecting any cooking zones.
2. Touch the timer control, the timer indicator shows “30” .
3. Adjust the timer setting by touch the “- “or “+” controls. The minute minder indicator will
start flashing and will show in the timer display.
Hint: Touch the “- “or “+” control of the timer once to decrease or increase by 1 minute.
Touch and hold the “- “or” +” control of the timer to decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute.
41
GB
MPM-45-IM-07, MPM-60-IM-04, MPM-60-IM-05_instrukcja_v03.indd 41MPM-45-IM-07, MPM-60-IM-04, MPM-60-IM-05_instrukcja_v03.indd 41 30.03.2020 10:1930.03.2020 10:19