EasyManua.ls Logo

MPM MPM-45-IM-07 - Care and Cleaning; Hob Surface Cleaning Procedures; Touch Control Area Cleaning

MPM MPM-45-IM-07
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CARE AND CLEANING
What? How? Important!
Everyday soiling on glass
(ngerprints, marks, stains
left by food or non-sugary
spillovers on the glass)
1. Switch the power to the cooktop o.
2. Apply a cooktop cleaner while the glass
is still warm (but not hot!)
3. Rinse and wipe dry with a clean cloth or
paper towel.
4. Switch the power to the cooktop back on.
When the power to the cooktop is switched o, there
will be no ‘hot surface’ indication but the cooking zone
may still be hot! Take extreme care.
Heavy-duty scourers, some nylon scourers and harsh/
abrasive cleaning agents may scratch the glass. Always
read the label to check if your cleaner or scourer is
suitable.
Never leave cleaning residue on the cooktop: the glass
may become stained.
Boil overs, melts, and hot
sugary spills on the glass
Remove these immediately with a sh slice,
palette knife or razor blade scraper suitable
for Induction glass cooktops, but beware of
hot cooking zone surfaces:
1. Switch the power to the cooktop o at
the wall.
2. Hold the blade or utensil at a 30° angle
and scrape the soiling or spill to a cool
area of the cooktop.
3. Clean the soiling or spill up with a dish
cloth or paper towel.
4. Follow steps 2 to 4 for ‘Everyday soiling
on glass’ above.
Remove stains left by melts and sugary food or
spillovers as soon as possible. If left to cool on the glass,
they may be dicult to remove or even permanently
damage the glass surface.
Cut hazard: when the safety cover is retracted, the blade
in a scraper is razor-sharp. Use with extreme care and
always store safely and out of reach of children.
Spillovers on the touch controls
1. Switch the power to the cooktop o.
2. Soak up the spill
3. Wipe the touch control area with a clean
damp sponge or cloth.
4. Wipe the area completely dry with a
paper towel.
5. Switch the power to the cooktop back on.
The cooktop may beep and turn itself o, and the touch
controls may not function while there is liquid on them.
Make sure you wipe the touch control area dry before
turning the cooktop back on.
46
GB
MPM-45-IM-07, MPM-60-IM-04, MPM-60-IM-05_instrukcja_v03.indd 46MPM-45-IM-07, MPM-60-IM-04, MPM-60-IM-05_instrukcja_v03.indd 46 30.03.2020 10:1930.03.2020 10:19

Related product manuals