MPP Solar 3KW - Operating Mode Description

27
Operating Mode Description
Operation mode
Description
LCD display
Standby mode
Note:
*Standby mode: The inverter
is not turned on yet but at this
time, the inverter can charge
battery without AC output.
No output is supplied by the
unit but it still can charge
batteries.
Charging by utility and PV energy.
Charging by utility.
Charging by PV energy.
No charging.
Fault mode
Note:
*Fault mode: Errors are
caused by inside circuit error
or external reasons such as
over temperature, output short
circuited and so on.
Utility can bypass.
No charging and Bypass
No charging
Bypass/ECO Mode
The unit will provide output
power from the utility. PV
energy and utility can charge
batteries.
Charging by utility and PV energy.
Charging by PV