EasyManua.ls Logo

MPP Solar HYBRID LV 6048 User Manual

MPP Solar HYBRID LV 6048
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HYBRID LV 6048
INVERTER / CHARGER
Version: 1.0
User Manual

Table of Contents

Questions and Answers:

MPP Solar HYBRID LV 6048 Specifications

General IconGeneral
ModelHYBRID LV 6048
Rated Power6000W
Nominal DC Voltage48V
Output Frequency50Hz / 60Hz
Max. AC Charging Current60A
Max. Solar Charging Current80A
Efficiency93%
Battery Voltage48V
Weight12 kg
Operating Temperature-10°C to 50°C
Max. DC Voltage500VDC
Battery TypeLead Acid / Lithium
ProtectionOverload, Over temperature, Short circuit
CommunicationRS232, USB

Summary

About This Manual

Purpose and Scope

Manual's purpose and scope of information.

Safety Instructions

General Safety Warnings

Contains essential safety and operating instructions for user reference.

Introduction

Features and System Architecture

Overview of inverter's features and basic system components.

Product Overview

Component Identification

Identifies all external components, ports, and indicators on the inverter.

Installation

Unpacking and Preparation

Covers unpacking, inspection, preparation, and unit mounting.

Battery Connection

Detailed steps and precautions for connecting the battery to the inverter.

AC Input/Output Connection

Instructions for connecting AC input/output and recommended cable sizes.

PV Connection

Instructions for connecting PV modules and selection criteria.

Final Assembly and Connections

Re-attaching covers, communication, and dry contact connections.

Operation

Power ON/OFF and Panel Overview

How to turn the unit on/off and an overview of the operation panel.

LCD Display Icons

Explains various icons and their meanings on the LCD display.

LCD Setting

Basic Programs (01-05)

Configuration for output priority, charging current, AC input voltage, and battery type.

Advanced Programs (06-18)

Settings for auto-restart, output, charging, and alarm controls.

System & Protection Programs (19-30)

Settings for display, overload, voltage, and PV conditions.

Charging & Equalization Programs (31-39)

Settings for solar balance, bulk charging, and battery equalization.

Operating Mode Description

Mode Overview

Explains Standby, Fault, Line, and Battery operating modes.

Fault and Warning Indicators

Fault Reference Codes

Lists fault codes, their events, and corresponding icons.

Warning Indicators

Explains warning codes, audible alarms, and icon flashing.

Specifications

Line, Inverter, and Charging Specs

Technical specifications for Line, Inverter, and Charging modes.

General Specifications

General specifications including safety certification, temperature, and dimensions.

Troubleshooting

General Troubleshooting

Addresses common issues like startup problems, power failures, and fault codes.

Appendix I: Back-up Time Table

Approximate Back-up Time

Provides estimated backup times based on load and battery capacity.

Appendix II: Parallel function

Parallel Setup Overview

Covers parallel introduction, package, mounting, and wiring connection guidelines.

Parallel Operation Modes

Details single, split, and three-phase parallel operations and commissioning.

Parallel ID, Settings, and Troubleshooting

Covers parallel ID setting, LCD settings, fault codes, and troubleshooting for parallel systems.

Related product manuals