Need help?Do you have a question about the MPP Solar 5KW and is the answer not in the manual?
General| Battery Voltage | 48VDC |
|---|---|
| AC Output Voltage | 230VAC |
| Battery Voltage (DC) | 48 VDC |
| Cooling Method | Fan Cooling |
| Rated Power | 5KW |
| Input Voltage Range | 90-280 VAC (For Home Appliances) |
| Output Voltage | 230VAC |
| Output Frequency | 50Hz / 60Hz (Auto sensing) |
| Input Voltage Range (VAC) | 170-280 VAC |
| Max Efficiency | 93% |
| Protection Features | Overload, short circuit |
| Operating Temperature | 0°C to 55°C |
Lists critical warnings and precautions for safe operation and installation.
Instructions for selecting an appropriate installation location and ensuring proper mounting.
Details recommended cable gauge, terminal size, and torque for battery connection.
Step-by-step guide for physically connecting batteries to the inverter.
Specifies recommended cable gauge and torque for AC input/output wiring.
Step-by-step guide for connecting AC input and output wires to the unit.
Details recommended cable size and torque for PV module connection.
Step-by-step guide for connecting PV module cables.
Instructions for turning the inverter on and off using the switch.
Configures priority for utility, solar, or battery power sources.
Sets the total charging current for solar and utility chargers.
Configures bulk, floating, and low DC cut-off voltages.
Lists fault codes, their events, and corresponding icons.
Lists warning codes, events, audible alarms, and icon flashing.
Details technical specifications for the inverter in line mode.
Details technical specifications for the inverter in battery mode.
Details specifications for utility and solar charging modes.
Solutions for startup shutdown, no response, and continuous beeping issues.
Addresses specific fault codes related to overload, temperature, fan, and internal failures.
To Next Page