MPP Solar 5KW - Battery Equalization Voltage and Timeout (Programs 34, 36); Equalization Interval and Activation (Programs 37, 39)

20
34
Battery equalization voltage
3KW default setting: 29.2V
5KW default setting: 58.4V
Setting range is from 24.0V to 32.0V for 3KW model and 48.0V to
64.0V for 5KW model. Increment of each click is 0.1V.
35
Battery equalized time
60min (default)
Setting range is from 5min to
900min. Increment of each click is
5min.
36
Battery equalized timeout
120min (default)
Setting range is from 5min to 900
min. Increment of each click is 5 min.
37
Equalization interval
30days (default)
Setting range is from 0 to 90 days.
Increment of each click is 1 day
39
Equalization activated
immediately
Disable (default)
Enable
If equalization function is enabled in program 33, this program
can be set up. If “Enable” is selected in this program, it’s to
activate battery equalization immediately and LCD main page will
shows “ ”. If “Disable” is selected, it will cancel equalization
function until next activated equalization time arrives based on
program 37 setting. At this time, “ ” will not be shown in LCD
main page.
40
Reset PV and Load energy
storage
Not reset(Default)
Reset