MPP Solar LV2424 User Manual

24
Main board firmware version
Version 00001.00
SCC firmware version
Version 00002.00
Operating Mode Description
Operating mode
Behaviors
LCD display
Standby mode
Note:
*Standby mode: The inverter
is not turned on yet but at
this time, the inverter can
charge battery without AC
output.
*Power saving mode: If
enabled, the output of
inverter will be off when
connected load is pretty low
or not detected.
No output power, solar
or utility charger
available
Battery is charged by utility.
Battery is charged by PV energy.
Battery is charged by utility and PV energy.
Battery is charged by PV energy and feed PV energy to
grid.
No charging.

MPP Solar LV2424 Specifications

General

Brand	MPP Solar
Model	LV2424
Category	Inverter
Language	English