Remote Screen Indicators
Page 5 mrcool.com
Remote Screen Indicators
NOTE: All indicators shown are for demonstration purposes. During actual operation, only
the relative and active functions will be shown in the display window.
Not all the models can display
the fan speed values between
AU-100%.
*
*
*
*
*
*
*
Information that is displayed when the remote controller is turned on.
Breeze Away display (some units)
MODE display
TIMER ON display
FAN SPEED:
TIMER OFF display
Silence:
This indicator lights
up when the Silence
function is activated.
ECO display
GEAR display
LOCK display
Horizontal louver
swing display
Vertical louver
auto swing display
TURBO MODE display
Not available for
this unit.
Temperature/Timer/Fan
speed display
Active clean feature display
Sleep mode display
Follow me feature display
Wireless control feature display(some units)
Low battery detection display (If flashes)
Displays when LOCK feature
is activated
Silence
LOW
MED
HIGH
AUTO
Displays selected fan speed:
Displays the current mode,
including:
2%-20%
21%-40%
41%-60%
61%-80%
81%-100%
1%
NOTE: The fan speed cannot be
adjusted in AUTO or DRY mode.
Displays when ECO feature
is activated
Displays when GEAR feature
is activated
Displays the set temperature
by default, or fan speed or
timer setting when using
TIMER ON/OFF functions.
• Temperature range:
60-86°F (16-30°C)/
68°F-82°F (20-28°C)
(model dependent)
• Timer setting range:
0-24 hours
• Fan speed setting range:
AU - 100%
This display is blank when
operating in FAN mode.
Transmission:
This indicator lights up
when the remote
transmits a signal to the
indoor unit.
To Next Page
Loading...
Need help?
General
