How To Use Advanced Functions
Page 8mrcool.com
How to Use Advanced Functions
Swing function
Airflow direction
LED Display
Press the SWING button
The horizontal louver will swing up and down
automatically when pressing SWING button.
Press it again to make it stop.
If continue to press the SWING button, five
different airflow directions can be set. The
louver can be moved to a different angle each
time you press the button. Continue pressing
the button until the desired setting is reached.
NOTE: When the unit is off, press and hold the MODE and SWING buttons together for one
second, the louver will move to an extreme angle to make it easier to clean. Press and hold
the MODE and SWING buttons together again for one second to reset the louver to its original
position (Model dependent).
Keep pressing the SWING button more than 2
seconds, this will activate the vertical louver
swing function (Model dependent).
2s
Press and hold the LED button more than 5
seconds, to make the display of the indoor unit
show the actual room temperature. Press and
hold the LED button for more than 5 seconds
again and the display will revert back to the set
temperature.
Press the LED button to either turn on or off
the display on the indoor unit.
5s
Press LED button Press and hold the LED button
more than 5 seconds (some units).
Swing
LED LED
Swing
Swing
To Next Page
Loading...
Need help?
General
