MSA 3S - Marking and Certification

3S Full Face Mask – Positive Pressure
7
Description
GB
2.2 Marking/Certification
Marking
The mask is marked on the outer face blank as shown in Fig. 2:
Fig. 2 Marking of mask body
Special Versions for using until -40°C
The mask is marked on the outer face blank as shown in Fig. 3:
Fig. 3 Marking of mask body
1 Mask Version
2 Part Number
3 Marking [date code, serial number]
4 CE-marking with notified body number
[DEKRA EXAM, Zertifizierungsstelle Dinnendahlstr. 9, 44809 Bochum]
5 X: ATEX classification A, B or C according to the Lens typ.
6 EN standard, class
1 Part Number 6 EAC conformity mark
2 Marking [date code, serial number] 7 CE-marking with notified body number
[DEKRA EXAM, Zertifizierungsstelle
Dinnendahlstr. 9, 44809 Bochum]
3 Icon “Read the Manual”
4 ATEX certification 8 Mask Version
5 GOST Certification Number
1
2
3
4
5
6
XXXXXXXX
YYYYYYYY MM/YYYY 1/XXXXX
EN 136:1998 CL3
TP TC 019/2011
12.4.189-99 CL3
0158
1
6
3
8
2
7
5
4