67
Appendix
GB
Model 9010/9020 SIL
Detectors Connection Data Sheet Series 47K- HT-PRP
WARNING!
Before connecting the measuring head reduce detector current to minimum
The cable screen is connected to 9010/9020 SIL module only.
Detector type: Catalytic/passive/constant current supply (3 wire passive)
Detector simulation module: Order No. 10030263
For further details see detector’s operation manual.
Bridge current 280 mA
Maximum nominal current 350 mA
Power consumption 1.0 W typical (without cable length)
Cable type 3 core, 80 % screened
Maximum loop resistance 36 ohms
Maximum cable length 1000 m (at wires cross section 1.5 mm2)
Wires allowed Cross section 1.0 …. 2.5 mm2
Cable diameter 7 ….12 mm
Junction box Order No 10151980
Mounting Wall mounted
To Next Page
Loading...
