To Next Page
A
Anthony SandersJul 28, 2025
What to do if the MSA Repeater shows any other error?
- KKristi MccoyJul 28, 2025
If the MSA Repeater shows any other error, it's not recommended to continue using the device. Return the device to an MSA service center.
What to do if the MSA Repeater shows any other error?
If the MSA Repeater shows any other error, it's not recommended to continue using the device. Return the device to an MSA service center.
What to do if the MSA Repeater power LED lights red?
If the power LED on your MSA Repeater lights up red, remove the battery. If the issue continues after replacing the battery, contact a service technician.
What to do if I encounter any other error with my MSA Controller?
If you encounter any other error with your MSA Controller, it is recommended to discontinue using the device and return it to an MSA service center for further assistance.
How to fix connection between ECB and HUB fails on MSA Control Panel?
If the connection between the ECB and the HUB fails on your MSA Control Panel, restart the MSA HUB. If the problem persists, tap on CHANGE WIFI to search for the correct network.
What to do if MSA Control Panel app crash?
If the MSA Control Panel app crashes, send the debug log to customer service, as described in chapter 6.1.
Why does my MSA Control Panel show connection to HUB lost?
If the connection to the HUB is lost on your MSA Control Panel, it may be due to the absence of a WiFi connection. Check the HUB's connectivity.
Procedure for turning the Entry Control Board on and off to conserve battery life.
Ensuring the ECB and tablet clocks display the same time for accurate operation.
Steps for establishing a connection between the ECB and the MSA HUB.
Guide on how to create and name a new Entry Control Point (ECP).
Procedure for connecting the ECB to an existing Entry Control Point.
Overview of how to access and modify various settings on the Entry Control Board.
Instructions for enabling the dark mode display setting on the ECB.
How to change the time format displayed on the ECB, e.g., Elapsed Time.
Steps to change the WiFi network connection for the ECB.
Details about the ECB application version, legal documents, and licenses.
Information on how to contact support, including phone numbers and email addresses.
How to configure alarm and warning thresholds for cylinder pressure.
Procedure for logging on the initial breathing apparatus wearer to the ECB.
Instructions for logging on subsequent breathing apparatus wearers.
Process for assigning a BA wearer to an already established team.
General| Type | Control Unit |
|---|---|
| Input Voltage | 24 VDC |
| Operating Temperature | -20°C to +60°C |
| Protection Rating | IP65 |
| Dimensions | 150 x 100 x 50 mm |
| Weight | 0.5 kg |
