MSA 9010 SIL User Manual

Company Reg No: SC260789 VAT Reg No: GB 828 8779 58
t: +44(0)141 771 7749
e: sales@frontline-safety.co.uk
Unit F, 230 Parkway Point, Springhill Parkway,
Glasgow Business Park, Glasgow, UK, G69 6GA
PRODUCT MANUAL
www.frontline-safety.co.uk

MSA 9010 SIL Specifications

General

Brand	MSA
Model	9010 SIL
Category	Control Unit
Language	English

Summary

Safety and Liability

Correct Use and Applications

Describes the intended use of the control unit and typical applications.

Liability Information

Details MSA's disclaimer for misuse and warranty voidance.

Product Description and Features

System Functionality Overview

Covers input configuration, alarms, outputs, failures, jumpers, and digital interfaces.

Installation Guide

Mechanical and Electrical Installation

Covers mounting procedures, regulations, and EMC precautions.

Power Supply and Wiring

Details power supply options, configurations, and terminal connections.

Detector and Transmitter Connections

Initial System Check

Operation and Configuration

Start-Up Procedure

Access Code 1: Calibration

Details zero and span calibration steps for passive detectors.

Access Code 2: Operating Conditions

Access Code 3: Simulation and Tests

Access Code 4: Configuration

Covers supply current, units, ranges, and alarm settings.

Other Access Codes: Basic Setup, Peripherals, I/O, Defaults

Calibration Procedures

Module Calibration for Passive Detectors

Details the procedure for calibrating passive detectors.

Calibration Procedure Steps

Outlines the step-by-step actions and display indications for calibration.

Maintenance and Troubleshooting

Maintenance Procedures

Failure Indications

Lists failure codes, descriptions, priorities, and specific failure types.

Error Indications during Calibration

Technical Data and Approvals

Technical Specifications

ATEX, SIL, and Version Information