10 Installing Accessories
10.1 Shoulder Strap
The shoulder strap is part of the scope of delivery.
To install the shoulder strap:
1. Place both ends of the strap at the shoulder strap attachment slits.
a. Make sure the strap is not twisted.
b. Make sure the even side of the connection strap is facing the bottom
of the ECB.
2. Put the bottom part of the connection strap into the slit.
3. Move the connection strap until the bottom part is completely disappeared
and stuck in the slit.
a. Check the reliable fit by pulling on the strap.
NOTE: The connection strap cannot be removed. It will remain stuck in
the ECB housing.
4. Repeat for the other end of the shoulder strap.
The shoulder strap is installed.
59
10 Installing Accessories GB
To Next Page
Loading...
Need help?
General
