Quick Start Card ALTAIR 4, ALTAIR 4X
Please review the back of this card for a detailed illustration
of the following components:
T But
ton S Button Button
•
Turn the instrument ON with the button. Instrument will
warm up an
d show
info & setpoints.
•
FAS: to accept press , to cancel press S
.
•
Page through screens with T button from the Normal
Operation screen.
•
ResetAlarm or PEAK and STEL values press S butt
on
•
To perform a Bump Check, press on Bump pag
e.
•
To Calibrate: ensure you are in fresh air and press the
S button in Normal Operation mode for more than
three
se
conds.
• To activate / deactivate MotionAlert feature (if equipp
ed),
page throug
h screens until MotionAlert screen an
d press
button.
•
Turn the instrument OFF by holding the
button.
•
For using Datalog: Most recent version
of the MSALink
softwa
re available on MSA website ha
s to be used.
WARNING
This quick start card provides only a brief description of the
operating instructions for the ALTAIR 4 Multigas Detector
Alarm. The user of this instrument must be fully aware of the
limitations and instructions supplied in the operating
instruction manual. Failure to follow the instructions may lead
to serious personal injury or death.
10092631/01 Y-HLR
GB
To Next Page
Need help?
General
