Need help?Do you have a question about the MSA Chillgard RT and is the answer not in the manual?
General| Brand | MSA |
|---|---|
| Model | Chillgard RT |
| Category | Measuring Instruments |
| Language | English |
Procedures for inspecting and unpacking the Chillgard RT Monitor unit upon arrival.
Detailed steps for inspecting internal components and assemblies after opening the unit.
Guidelines for selecting the optimal and safe location for the refrigerant monitor.
Instructions on determining the best sampling points for accurate refrigerant detection.
Guidance on arranging equipment in the room for effective sampling and monitoring.
Steps for mounting the unit and installing sample inlet/exhaust tubing.
Procedures for connecting the primary power supply to the Chillgard RT unit.
Connecting analog outputs for data transmission and configuring output ranges.
Installing ferrite beads for noise reduction and the optional alarm beacon.
Details on alarm relays, their configurations, and connection wiring.
Managing trouble conditions, remote resets, audible alarms, and auxiliary inputs.
Procedure for calibrating the unit after installation to ensure accurate readings.
Visual guide to the monitor's display screen navigation and function flow.
Screens shown during initial start-up, warm-up, and normal operational states.
Flowcharts illustrating the navigation through various setup menu screens.
Flowcharts detailing the steps for span, zero, and check calibration procedures.
Flowcharts for accessing and interpreting various diagnostic checks of the unit.
Flowcharts for viewing recorded data, including last values and point data.
Screens for configuring the multipoint sequencer, de-activating points, and locking operation.
Setting alarm thresholds, dwell times, and latching behavior for alarms.
Configuring audio output for alarms and settings for auxiliary inputs.
Setting system time/date and configuring data logging parameters.
Setting password protection and reviewing logged events and data.
Understanding the importance of calibration and the required equipment.
Choosing calibration gases and identifying the unit for proper calibration.
Step-by-step guide for performing span, zero, and check calibration using the calibration kit.
Routine maintenance tasks and procedures for ordering replacement parts.
Diagnosing issues with the unit not turning on, or beacon/audio alarms not lighting.
Diagnosing problems related to under-range, calibration failures, and flow system issues.
Diagnosing issues with temperature, humidity, infrared source, and display communication.
Explanation of the unit's data logging capabilities, capacity, and data types.
How to access and review recorded alarms, events, and concentration data.
Overview of the relay module's function and its technical specifications.
Instructions for connecting main power and communication cables to the relay module.
Details on relay functions, operation, configuration, and maintenance of the relay module.
Guidance for troubleshooting common issues with the relay module's LEDs and functionality.
Introduction to RS-232 output and its communication parameters.
Explanation of RS-232 message types: status, logged data, and alarm events.
Instructions for connecting the RS-232 output to a computer using the appropriate cable.
Overview and specifications for the monitor's multi-refrigerant detection capabilities.
Steps to identify unit and program for multiple refrigerant gases.
Calibrating for multiple gases and understanding specific multi-gas display and alarm screens.
To Next Page
